|
|
Project Shopping List
Shop purchased box (ours measured 10cm/4" square by 10cm/4" tall)
Paint
Paint brush
Silver peel 'n' stick borders
Embossing foil
Embossing ink
Black embossing powder
Heat gun
Scissors
Storng double sided sticky tape or good all purpose glue
|
 |
| A great little box, ideal for storage or for presenting a gift in style. |
Instructions |
|
Step one - Paint the box and allow to dry, should it need it give a second coat.
|
|
Step two - Stamp onto the embossing foil and sprinkle with the embossing powder, heat in the normal way.
|
|
Step three - Cut out making sure you have five motifs, one for each side plus one for the lid.
|
|
Step four - Place three peel 'n' stick strips around the lip of the lid.
|
|
Step five - Attach the foil motifs to the four sides of the box and the top of the lid to complete project.
|
Tricks of the Trade
Rubber stamping - dealing with mistakes on embossing foil
If you smudge the image then simply wash the ink off of the embossing foil, allow it to dry naturally then start again.
Rubber stamping - onto embossing foil
Once you have stamped onto the foil and allow it to cool why not add extra interest by adding a little pressure embossing to the design?
|
Printer Friendly Page |
